WATER COOLER FAULT TRAINER
IPC-72-RAC
SPECIFICATION:
The Water Cooler Fault Trainer Model: IPC-72-RAC is an ideal study Unit. Running Capacity 30 Liters, with R134a Gas, Water Tap, Drain Tray, Operates on 220Volts 50 Hz with complete accessories, wiring diagram and warranty card and operational manual.


CHILLER FAULT TRAINER
IPC-57-RAC
SPECIFICATION:
Study unit capacity 2.5 to 4 Tons 3 Phase 380-400V, AV 50Hz with complete accessories wiring diagram and warranty card, complete operation manual, Installation and commissioning of the said unit by the supplier.
SPLIT AIR CONDITIONER FAULT TRAINER
IPC-55-RAC
SPECIFICATION:
The trainer model: IPC-55-RAC is wall mounted type, 1.5 Tons/18000BTU/hour capacities, Reverse cycle system, Remote control, Single Phase, Supplied with complete accessories along with fittings, Faults in form of Electrical and Mechanical, Instructional manual, wiring diagram, and warranty card. The system operates on 220-230 Volts AC
HERMATIC REFRIGERRATION SYSTEM
IPC-BR-54
SPECIFICATION:
Model: IPC-BR-54 is a basic Hermatic refrigeration system, trainer. It guides student engineers in detecting faults and repair of: Domestic refrigerators, domestic freezers, bottle coolers and domestic air conditioners. The Model: IPC_BR-54 consists of Hermatic condensing unit with fan cooled condenser, front mounted evaporator with suction accumulator, liquid line drier, compound gauge,
pressure gauge, suction & discharge service valves. Model: IPC-BR-54 has electronic digital temperature readout to measure the condenser outlet temperature, evaporator-inlet temperature and evaporator-outlet temperature. It can simulate five different kinds of faults in the system i.e., excess discharge pressure, faulty compressor, blocked capillary, overcharged system and undercharged system. Also have control switches with indicator lights for faults selection. The system operates on 220V 50Hz & refrigerant R-134a.L x W x H 40 x 30 x 30 inches.
DEEP FREEZER FAULT TRAINER
IPC-66-RAC
SPECIFICATION:
Trainer unit model: IPC-66-RAC is suitable for training / demonstration of deep freezer with R134a gas components, capacity 12-13 cubic feet triplet type, operates on 220V, 50Hz with complete accessories, instruction manual and wiring diagram, warranty card. Mounted on angle iron stand 1� x 1� x 3/16�.
BASIC REFRIGERATION DEMOSTRATION CYCLE
IPC-55-BR
SPECIFICATION:
The Basic refrigeration cycle demonstrator trainer is fully equipped to under stand the principals of refrigeration cycle; the refrigeration demonstrator puts four main parts of refrigeration system into the hands of student, i.e. condenser, compressor, evaporator and control device. Components are arranged to clearly illustrate the cycle nature of refrigeration. Sight glass allows to monitor the gas circulation by 1/5 HP hermetic compressor through capillary tube refrigerant control device. Before and after sight glasses,
high / low pressure gauges permits continued observation as vapor moves through compressor and onto air-cooled condenser. Refrigerant is again visible through a sight glass as it passes to filter dryer prior to recycling.The trainer is completely assembled with safety protection switch, main power switch, volt meter, ampere meter, indication lamps, temperature indicator, condenser, evaporator, compressor, sight glasses, capillary tube, high/low pressure gauges, charged with refrigerant 134A, along with refrigeration cycle block diagram. User manual, Operates on 220Volt 50Hz.
AIR HANDLING FAULT TRAINER
IPC-27-RAC
SPECIFICATION:
The Air Handling Fault Trainer Model: IPC-27-RAC is an ideal study Unit. 1.5 Tons, operates on 380-400 V, AC 50 Hz with complete accessories, wiring diagram and warranty card, operational manual.
ABSORPTION REFRIGERATION DEMONSTRATION
IPC-612
Specification:
The principal of the absorption refrigeration demonstrator is often difficult to understand as this principle is not at the first sight like the refrigeration system with a built-in compressor. This impression is intensified by the fact that the unit is built in to the refrigerator it self so it is almost impossible to get a general view of the flow and the piping.The Model: IPC-612 demonstrator,
the insides have been removed from an absorption unit and placed in such a way that it can immediately be compared with the enclosed flow diagram. The warm side is separated from the cold side. The system can function both with 12V and 220V. Heat Source .. 220V and 12V heater, 85W Working fluids .. Ammonia / Water Dimension .. 700* 550 1500mm (L*W*H).